Changing the oil and oil filter on a Busch pump is an essential maintenance task that ensures the pump operates efficiently and has a long service life. Here’s a step-by- step guide to help you through the process:

Materials Needed:

• Replacement oil (check the pump manual for the correct type and amount) New oil filter (specific to your Busch pump model)
• Wrenches and/or socket set
• Oil drain pan
• Funnel
• Clean rags or paper towels
• Safety gloves and goggles

Steps to Change Oil and Oil Filter:

1. Safety First: Make sure the pump is turned o and unplugged from any power source. Allow the pump to cool down if it has been in use, as the oil can be hot.

2. Locate the Oil Drain Plug: Find the oil drain plug on the pump. This is typically located at the bottom of the oil reservoir.

3. Drain the Old Oil: Place an oil drain pan under the drain plug. Remove the drain plug using a wrench or socket set and let the oil drain completely into the pan. Once drained, replace the drain plug securely.

4. Remove the Old Oil Filter: Locate the oil filter, which is generally near the oil reservoir. Use an oil filter wrench to unscrew and remove the old filter. Be prepared for some oil to spill out when removing the filter, so have rags or paper towels handy.

5. Install the New Oil Filter: Before installing the new oil filter, apply a small amount of new oil to the gasket on the top of the filter. This helps create a good seal. Screw the new filter onto the pump by hand until it is snug. Avoid over-tightening.

6. Add New Oil: Locate the oil fill cap on the pump and remove it. Using a funnel, pour the recommended type and amount of new oil into the oil reservoir. Replace the oil fill cap securely.

7. Check for Leaks: Plug the pump back in and turn it on briefly to circulate the new oil. Turn on the pump and check around the drain plug and oil filter for any leaks. Tighten if necessary.

8. Dispose of Old Oil and Filter Properly: Transfer the used oil to a sealed container. Take the old oil and filter to a recycling center or an auto parts store that accepts used oil and filters for proper disposal.

Tips:

Always refer to the pump’s manual for specific instructions and oil type recommendations. Regularly check your oil level and quality between changes to ensure optimal performance.
Keep a maintenance log to track oil changes and other service activities.

By following these steps, you will help ensure your Busch pump remains in good working condition and lasts longer.